Xerox 4635 Operator's Manual page 122

JOB CONTROL TASKS
Lead Edge Screen task
through windows
Lead Edge Screen task through
5-10
1. Select "Lead Edge Screen" from the Job Control menu to
open the Lead Edge Screen window.
Figure 5-8.
The current value of edge lightening is indicated by the
highlighted button.
2. Select one of the following options:
•
•
•
3. Select the appropriate header button:
•
•
•
command line • To change the edge lightening value, enter the following
command:
EDGE [NORMAL|STRESS|OFF]
NORMAL
STRESS
OFF
• To display the current value of edge lightening, enter the
following command:
EDGE
Lead Edge Screen window
To apply a normal lead edge screen, select the Normal
button.
To apply a heavier lead edge screen, select the Stress
button.
To turn the lead edge screen off, select the Off button.
Apply/Close. Apply your selection and close the window.
Apply. Apply your selection.
Close. Close the window.
Apply normal edge lightening.
Apply heavier edge lightening.
Turn off edge lightening.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE