Xerox 4635 Operator's Manual page 77

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
Note: The high-capacity feeder trays give you the option of
loading paper with the short edge touching the side paper guide
and the long edge touching the rear paper guide. This allows
the 4635 LPS to print on larger paper than would fit in the tray
the usual way (that is, with the long edge touching the side
paper guide and the short edge touching the rear paper guide).
The way you load the paper in the high-capacity feeder trays
depends on the paper size required by the job. (Refer to figures
3-8 and 3-9.) Refer to the 4635 LPS Operations Reference for
size considerations for short edge feed (SEF).
Figure 3-8. Paper loaded normally (for example, 7 by 10
inches/178 by 254 mm)
Figure 3-9. Paper loaded with the short edge to the left (for
example, 11 by 17 inches/279 by 432 mm)
PAPER FACTS
3-13