Xerox 4635 Operator's Manual page 195

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
— Busy. The bin elevator is raising or lowering.
— Lowered. The bin elevator is down.
• Stacker bin size. The size is either:
— None. The bin is empty and containers are not being
used. Any size output can be stacked in the bin.
— x by y. The size of paper or container and paper
currently stacked in the bin.
Note: When various sized paper is stacked in a bin, the size
displayed indicates the largest paper width and length.
• Stacker bin levels. The levels depicted indicate:
— Empty
— 1 ream
— 2 reams
— 3 reams
— 4 reams
— Full.
• Output bin mode. The mode is either:
— Auto. When the first bin is full, stacking automatically
switches to the next bin.
— Separate. The report switches to the next bin at the
report boundary.
Note: The Output Bin mode displays on the bin that is
currently in use.
Notes:
• You can also access the Printer Status window (PC UI) or
display by pressing the <PRINTER STATUS> key.
• The printer control console also provides a mimic of the
printer showing some of the same information specified in
this section.
• If you have the system controller terminal, or are running
print jobs using command files, you will not see all of the
information listed in the previous section.
STATUS AND PRINT TASKS
9-5