Clearing A Misfeed (Feeder Tray Fault) - Xerox 4635 Operator's Manual

Clearing a misfeed (feeder tray fault)

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
Figure 12-27. Area 20
6. Remove any paper in the exposed area.
7. Press the green lever down and to the left until the latch
catches.
8. Close the Bypass Transport Module door.
1. Go to the feeder tray indicated by the message and display
on the printer control console.
2. If the Ready to Open indicator is not lit, press the Tray
Unlock button located on the feeder tray control panel.
Figure 12-28. Tray Unlock button
3. When the Ready to Open indicator lights, open the feeder
tray. Pull the tray all the way out for best results.
4. For the processor feeder trays, press the green lever to
unlatch the paper feeder assembly.
PROBLEM SOLVING TASKS
12-21