Sample Tray And Purge Tray; Sample Tray; Purge Tray - Xerox 4635 Operator's Manual

PAPER FACTS

Sample tray and purge tray

Sample tray

Purge tray

3-20
7. Firmly push the platform back to its original position and
close the bin doors. The bin elevator rises, and the bin is
again ready for use.
Note: If the bin is not empty, the elevator remains down,
and a message appears on the printer control console and
the PC UI or system controller display telling you to empty
the bin.
This section describes the sample and purge trays of the 4635
LPS.
Samples requested during operation of the LPS are delivered to
the sample tray. The sample tray can hold up to 100 sheets. It
can handle paper sized from 8 by 10 inches/203 by 254 mm to
11.69 by 17 inches/297 by 432 mm.
Notes:
• Optional 7 X 10 enablement kit allows paper sized from 7 by
10 inches/178 by 254 mm to 14.33 by 17 inches/364 by 432
mm.
• Since the sample tray can receive waste sheets purged after a
paper jam, always clear the sample tray after clearing a jam.
This prevents waste sheets from being confused with good
sample sheets.
• No message appears when the sample tray is full. Since a
paper jam can occur if the tray is overfilled, empty the
sample tray regularly, if it is in use.
Aborted sheets (that is, sheets damaged during printing or
cleared before or after a paper jam) are sent to the purge tray.
The purge tray can hold up to 100 sheets. It can handle paper
sized from 8 by 10 inches/203 by 254 mm to 11.69 by 17
inches/297 by 432 mm.
Notes:
• Optional 7 X 10 enablement kit allows paper sized from 7 by
10 inches/178 by 254 mm to 14.33 by 17 inches/364 by 432
mm.
• No message appears when the purge tray is full. Since a
paper jam can occur if the tray is overfilled, empty the purge
tray at least once a day.
• Sheets may be purged before, during, or after print jobs.
• Sheets are sent to the purge tray following a fuser area jam.
The sheets purged at that time clean the fuser area, ensuring
good print quality for your subsequent jobs.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE