Select Feeder Trays - Xerox 4635 Operator's Manual

STATUS AND PRINT TASKS

Select feeder trays

Select Feeder Trays task through
9-8
Use this task to override stock selections in the print job and
force printing of a job using a specific tray, cluster, or a feeding
device.
windows 1. Select the Feed Mode header button from the Printer Status
window to open the Feed Mode window.
Figure 9-4.
MAIN
AUX
AUTO
1
2
3
4
5
6
7
Cluster...
Note: Options 5, 6, and 7 only appear if the system is
configured with these parts.
2. Select one of the following options:
• To use the clusters set up in the print job, select MAIN
from the Feed Mode window.
• To feed paper from the Aux cluster, select AUX from the
Feed Mode window.
• To feed paper from all trays, select AUTO from the Feed
Mode window.
• To feed paper using a specific cluster, select Cluster... to
open the cluster window, then select an option from the
displayed list.
• To feed paper from a specific tray, select the tray number
from the Feed Mode window.
• To feed paper from a bulk feeder, select 7 from the Feed
Mode window.
Feed Mode window
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE