Cleaning The Sensors And The Reflecting Surfaces; Cleaning The Q850 Sensor - Xerox 4635 Operator's Manual

MAINTENANCE TASKS

Cleaning the sensors and the reflecting surfaces

11-10

Cleaning the Q850 sensor

Follow this procedure when directed by the Xerox Customer
Support Center personnel.
1. Open the printer right and left doors and locate area 4.
2. Raise the area 4 green handle until it locks into place.
Figure 11-14. Raising the Area 4 green handle
3. Locate the Q850 sensor. (Refer to figure 11-15.)
4. Place a dry cleaning pad on the sensor and move it from left
to right to clean the sensor.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE