Xerox 4635 Operator's Manual page 68

PAPER FACTS
Paper Superior performance
Size range*** 8 by 10 to 11.69 by 17
inches/203 by 254 to 297 by
432 mm. Includes:
• 11 by 14 inches
• 11 by 17 inches
• B4 (250 by 353 mm)
• A3 (297 by 420 mm)
Weight range 20 to 110 pounds/75 to 200
gsm
Capacity Tray 3: 2600 sheets, 20
pound/75 gsm paper
Tray 4: 2600 sheets, 20
pound/75 gsm paper
Type or • Xerographic paper in
condition good condition
• Predrilled stock
(fanned thoroughly)
3-4
Table 3-3. Trays 3, 4, 5 and 6 (or high capacity trays)
performance guide**
Good performance
16 to 20 pounds/60 to 75
gsm****
• Slightly curled paper*
• Manual two-sided
(duplex prints)
• High speed label stock
* Curl direction should be determined before loading
paper into trays. Refer to the "Paper jams and paper
curl" section of chapter 12, "Problem solving tasks," for
additional information.
** Refer to the Paper stocks guide for additional
information.
*** Optional 7 X 10 enablement kit allows 7 by 10 inches/178
by 254 mm paper size.
**** Make sure that heavy weight paper levers (located in
areas 2 and 4 of the printer) are in the appropriate
position for the weight of paper being used. Refer to
the "Prints are skewed" section of the "Problem solving
tasks" chapter.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
Performance limits and
suggested alternatives
Smaller or larger sizes
cannot be used.
Weights outside the limits
shown are not
recommended.
For greater capacity, use the
Autoswitch feature.
• Excessively curled
paper*
• Curl direction should be
determined before
loading paper into tray.*
• DO NOT use mylar
reinforced paper in trays
3, 4, 5 or 6. Hardware
damage may result. Use
trays 1 or 2.