Xerox 4635 Operator's Manual page 80

PAPER FACTS
Paper Superior performance
Size range* 8 by 10 to 11.69 by 17
inches/203 by 254 to 297 by
432 mm.
Weight range 20 to 110 pounds/75 to 200
gsm
Capacity
Stack quality • Xerographic paper in
good condition
• 20 pound/75 gsm and
heavier stock
• Very low to no output
curl
Type or • Xerographic paper in
condition good condition
• Predrilled stock
• No cut-outs, perforated
or intermixed weights
3-16
Table 3-6. Stacker bin performance guide
Good performance
Lighter than 20 pounds/75
gsm and no lighter than 16
pounds/60 gsm
• Lighter weight stocks
with low output curl
• Intermixed stocks
• Labels, preprinted forms,
perforated stocks
• Intermixed weights
* Optional 7 X 10 enablement kit allows 7 by 10 inches/178 by
254 mm paper size.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
Performance limits and
suggested alternatives
Smaller or larger sizes
cannot be used.
Weights outside the limits
shown here are not
recommended.
• Capacity automatically
limited so stack weight
will not exceed 30
lbs/13.g kg
• Selectable with bin
capacity programming
(Refer to the "Bin full
criteria and setting bin
limits" section of chapter
9, "Status and print
tasks," for instructions.
• Adjust process decurler
• Flip paper in paper
feeders
• Limit stack capacity to
acceptable limits.
• High output curl stocks
can cause severe stack
quality problems
• Tab stock intermixed
with smaller stocks
results in degraded stack
quality
• Reinforced mylar should
be limited to small stacks
of 200 sheets or less or
sent to the sample tray.