Ordered Stock - Xerox 4635 Operator's Manual

Ordered stock

Ordered Stock task through windows
Ordered Stock task through
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
Ordered stock consists of paper arranged in a specific order in a
feeder tray so that it can be printed in a cycle. Prenumbered
sheets and tabs are two examples of ordered stock.
The Ordered Stock task allows you to reset the ordered stock
position in the feeder tray.
Note: Changes made in the Ordered Stock window are not
reflected when the widow is reopened. The defaults are
displayed instead.
1. Select the "Ordered Stock" option from the Printer Status
window's header auxiliary menu to open the Ordered Stock
window.
Figure 9-8.
2. Select the number of the tray containing the ordered stock
from the Tray Number field's auxiliary menu.
3. Enter the ordered stock position in the Position field.
For example, to tell the LPS that page number 6 is ready to
be printed from ordered stock in tray 3, enter 3 in the Tray
Number field and 6 in the Position field.
4. Select the appropriate header button:
•
•
•
command line Enter the following command:
OSTK m,n
m
n
For example:
1. You are printing a job using prenumbered sheets of paper,
numbered from 1-10, feeding from tray 3.
2. You remove some sheets from the top of the stack in tray 3.
3. The LPS expects the next sheet to be number 3, though it is,
in fact, number 6.
Ordered Stock window
Apply/Close. Apply your selection and close the window.
Apply. Apply your selection.
Close. Close the window.
The number of the tray containing the ordered stock.
The new position of the ordered stock.
STATUS AND PRINT TASKS
9-17