Status And Print Tasks - Xerox 4635 Operator's Manual

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
9.
This chapter contains instructions for obtaining printer and job
status information, selecting feeder trays and stacker bins,
managing clusters, setting up bin limits, handling feeding and
finishing devices, and using the Notepad task.
Where applicable, instructions are given for accomplishing the
task using either the windows of the PC UI or keyed-in
commands. Refer to the table below for a list of the tasks
described in this chapter.

Status and print tasks

Status and print tasks through windows of PC UI
Status and print tasks through command line
Understanding clusters
Printer status
Through PC UI windows
Through command line
Select feeder trays
Through windows
Through command line
Select stacker bins
Through windows
Through command line
Tray loading
Through PC UI windows
Through system controller terminal
Clusters
Through windows
Through command line
Ordered stock
Through windows
Through command line
Transparencies
Through windows
Through command line
Select units
Through windows
Purge feed
Through windows
Through command line
Lower trays and bins
Through windows
Through command line
Set tray size
Through windows
Through command line
Set container size
Through windows
Through command line
Table continued on next page
Status and print tasks
9-1