Xerox 4635 Operator's Manual page 32

SYSTEM OVERVIEW OF THE 4635 LASER PRINTING SYSTEM
1-10
Figure 1-10. Printer control console
1. Continue button. Press this button to resume printing.
2. Stop button. Press this button to stop printing.
3. Sample button. Press this button to cause a sample of the
current print job to be sent to the sample tray.
4. Brightness control thumbwheel. Use this thumbwheel to
adjust the brightness of the printer control console display.
5. Language icon. If two languages are available for your
printer control console, selecting this icon allows you to
choose the language for the printer control console
messages.
6. Clear button. Select this button to clear fault messages.
7. Printer icon. Select this icon to display the printer mimic.
(This is the default display on the printer control console.)
8. Fault List icon. Select this icon to display the Fault List
screen. Refer to the "Fault masking and the printer control
console" section of chapter 12, "Problem solving tasks," for
additional information on this screen.
9. Tools icon. Select this icon to display call for service
information and to adjust display features of the printer
control console (for example, alarm loudness).
10. Guarded Tools icon. This icon is reserved for the service
representative and operators who have completed Advanced
Customer Training (ACT).
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE