Xerox 4635 Operator's Manual page 187

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
Figure 8-7 shows the format of a normal display screen.
Figure 8-7. Example of HIP job status display
HOST:hst:linemode HIP:runmode
JID# HOST NAME RECEIVED
nnnn host name hh:mm:ss
. . .
. . .
. . .
HP1110 END OF JOB DISPLAY
In the display, the following fields appear:
hst Specifies one of the possible hosts (XNS or
XPF).
linemode Specifies the status of the host interface
(OFFLINE, ONLINE PEND, READY, RECEIVING,
SENDING, or SUSPENDED).
runmode Specifies the jobs run mode (STARTED,
STOPPED, DUMP, or CONCATENATED).
filemode Specifies the acceptable file types (ALL JOBS or
PRINT JOBS).
nnnn Specifies the internal job identification number
(JID) for HIP.
hostname Indicates the host name on the file label.
0000 Specifies the job number assigned by OCS
when the job is submitted for printing. It is
0000 for nonprint and pending jobs.
hh:mm:ss Specifies the time a job was received and
when its status was last changed.
status Specifies the current status of a job, which is
one of the following:
HIP PRINTING TASKS
FILEMODE:filemode
STATUS JOB# TIME
status 000 hh:mm:ss
. . .
. . .
. . .
8-13