Xerox 4635 Operator's Manual page 92

SYSTEM CONTROL TASKS
System rollover message through
system controller terminal (non-U.S.
4-8
Figure 4-7.
3. Vary the LPS offline from the host and either select the 'C'
header button or enter "C" in the Messages window.
Another message appears telling you that the system is
reloading the software.
4. After the software is reloaded, the following confirmation
window appears, asking if abort data should be printed for
later analysis.
Figure 4-8.
5. Select Yes or No, as appropriate.
6. Another confirmation window appears asking if you want to
recover jobs.
Figure 4-9.
7. Select Yes or No, as appropriate.
markets only) If you are running the printer online, the system controller
display shows the following message:
OS2575 SYSTEM ROLLOVER.
1. Enter "C" to initiate the recovery procedure. With either
online or offline mode, the following messages are displayed:
Information window (system rollover)
Confirmation window (print abort data)
Confirmation window (auto job recovery)
VARY OFFLINE FROM HOST.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
ENTER 'C'