Page 1 XEROX Xerox 4635 Laser Printing System PC User Interface Reference January 1996 721P83101...
Page 2 Printed in the United States of America Publication number: 721P83101 Xerox® and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. Products and trademarks of other companies are also acknowledged. MS-DOS and Microsoft Windows are trademarks of Microsoft Corporation.
Page 3: Related Publications
Related publications The Xerox 4635 Laser Printing System PC User Interface Reference is part of the ten-manual reference set for your laser printing system. The entire reference set is listed in the table below. Several other related documents are also listed for your convenience.
Page 4: Notice
This publication may contain descriptions of concepts and features not currently available for your Xerox Laser Printing System. Consult your Xerox sales representative or your operating system software program description for additional information. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 5: Table Of Contents
Using the scroll bars 1-20 Activating an open window 1-21 Performing operator tasks through the PC UI 1-22 Performing tasks through windows 1-22 Entering commands through the Command Line/Message window 1-22 Key-in conventions 1-22 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 6 Disk to Unlabeled Tape Unlabeled Tape to Disk Copy To/From Floppy 3-10 Delete 3-11 Review 3-12 Rename 3-13 Secure 3-13 3-14 Scale 3-15 4. Disk windows Disks menu Backup Compress Download Controller (PSC) XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 7 6. Print Tasks windows Print Tasks menu Jobs Status Printer Status Feed Mode Bin Mode Clusters 6-10 Finishing Configuration 6-12 Feeding Configuration 6-13 Feeding/Finishing Configurations 6-14 Units 6-15 Transparencies 6-15 Ordered stock 6-16 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 8 8. System Control windows System Control menu Change Logon Class Level Change Password Restrict Command Usage (RCU) Restrict PC Features System Version Attention Light/Alarm Energy Saver Set Date/Time Substitute Device viii XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 9 Audit Log Display Options 8-26 Audit Log Save 8-29 Audit Log Administration 8-30 Audit Log Defaults 8-33 Stale Date 8-37 Exit to DOS 8-38 9. Notepad window Glossary GLOSSARY-1 Index INDEX-1 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 11: Introduction
Introduction The Xerox 4635 Laser Printing System PC UI Reference is one of eight manuals which make up the LPS Reference Set. PC UI is an acronym for Personal Computer User Interface. This guide is part of a set of documents designed to help you receive maximum benefit from your 4635 laser printing system.
Page 12 Guide • PC UI procedures • Hierarchy of PC UI windows 4635 LPS PC UI Reference • Provides a quick reference of commonly-used operator commands. 4635 LPS Operator Command Summary Card XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 13 • Data sheets Font Library Font User • Glossary of typography terminology Guide • Selection and guidelines • Storage and handling Helpful Facts • Specifications for different printers About Paper XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE xiii...
Page 14: How To Use This Manual
Device: All Disks, DP0, DP1, DP2, DP3, TD0, TD1, TD2. Select/enter the system disk or tape reference. In this example, unless you specify another system disk or tape device, the system will automatically default to the All Disks option. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 15: File Id And Masking
For example: FILE AB??.FNT The above example specifies that all file-names beginning with AB that are 2, 3, or 4 characters long of file-type FNT be displayed. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 17: Using The Pc Ui
Using the PC UI This chapter explains the PC UI in detail. If your LPS has the system controller keyboard/display rather than the PC UI, refer to the 4635 Operator Guide, appendix C, “Using the system controller keyboard/display.” PC UI With the PC UI you perform operator tasks through a dynamic set of windows.
Page 18: Powering On The Pc Ui
Some information appears on the screen as the PC UI starts. Next, the Wait cursor appears (refer to the “Types of cursors” section later in this chapter). Next, you see the screen depicted in figure 1-4. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 19: Adjusting The Pc Ui Monitor
1. Contrast control. Turn this wheel clockwise (to the right) to increase the contrast of the monitor display. 2. Brightness control. Turn this wheel clockwise (to the right) to increase the brightness of the monitor display. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 20: Components Of The Pc Ui
— F6. Printer status display — F7. Start window — F8. Messages window — F9. Apply/Close — F10. Apply — F11. Close — F12. Not functional at this time (future use as an information key) XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 21: Special Function Keys
Appears when a system activity is being processed (for example, when a window is being opened) and during system initialization. • Data Entry caret. Appears when you can enter information in a field (an input field). XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 22: Moving The Cursor
PC UI mouse The PC UI mouse controls the movement of the cursor. Use the mouse to position the cursor in order to select icons or options on the desktop. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 23: Selecting Options With The Mouse
Position the cursor on top of the icon option or option you want to select by sliding the mouse over the mouse pad. Then click once with the left mouse button to select the option. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 24: Pc Ui Desktop
Selecting this button also causes any outstanding printer faults to be displayed in the window. Note: Entering CLEAR has the same effect as selecting the Clear Faults button or touching the Clear button on the printer control console. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 25: Desktop Icons
Messages appear in the Command Line/Message window of the PC UI. • The Hint icon also appears on the printer control console, along with messages and graphic displays. • If enabled, the printer Attention light goes on. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 26 • Window size (to accommodate translated text) • Any data received after the language change. The following screen features are not translated or modified when a new language is selected: 1-10 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 27 A few of the tasks you can perform through Accounting windows are: • Access the list of completed reports (status file service) • Access activity and user report information • Print billing statistics. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 1-11...
Page 28: Notepad Window
Transfer a single file from a Backup (DSR) tape to system disk • Exit to DOS. Notepad icon. This icon allows you to access the Notepad window to view or create electronic notes for yourself or other PC UI users. 1-12 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 29: Windows
• Yes. This button confirms the question asked in the window and closes the window. • No. This button does not confirm the question asked and closes the window. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 1-13...
Page 30 (If the index bar is all white, all the window information is already displayed.) 3. Window interior containing any of the following: g. Input fields. In these areas you may enter information (such as, scan number). 1-14 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 31 (refer to the “PC UI mouse” and “PC UI keyboard” sections of this chapter). Only one button can be selected from a set of buttons; multiple check boxes may be selected in a set of check boxes. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 1-15...
Page 32 USING THE PC UI Figure 1-12.Window example of output field Output fields. Display only fields. 1-16 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 33 — A cycle down of the printer may occur as a result of the proposed action. A green header bar means that you must respond to the confirmation window before any other actions can take place in the PC UI. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 1-17...
Page 34: Working With Windows
• Select options from the window header • Select options from the auxiliary menu • Select options from the main part of the window • Enter information into the window. 1-18 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 35: Moving And Resizing The Window
3. Move the cursor: • To the right • To the left • • Down • Diagonally to change the size of the window, accordingly. To resize the window using only the keyboard: XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 1-19...
Page 36: Using The Scroll Bars
“drag” the box up or down within the scroll bar. Text within the window moves up or down accordingly. • You can scroll text using only the keyboard in the following manner: 1-20 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 37: Activating An Open Window
Only one window can be active at a time, although more than one window can be open at a time. To activate an open window, move the cursor into the work area of the window and XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 1-21...
Page 38: Performing Operator Tasks Through The Pc Ui
• A message acknowledging your request appears as positive feedback to you. An error message OS2710 INVALID COMMAND, appears when a command is entered PLEASE RE-ENTER incorrectly. 1-22 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 39: Guide Command Conventions
The TEM function also may be used with the optional XPSM software. In this instance, the TEM command transfers control of the 4635 from the PCUI to a remote terminal. Once control has been transfered, the system will no longer respond to the PCUI and control can only be transfered back by entering the command @UI$ at the remote terminal or rebooting the 4635.
Page 41: Accounting Windows
Accounting windows The Accounting windows are used to maintain and print the status file service (SFS) list and printer activity reports. Accounting menu Figure 2-1. Accounting menu window showing selectable tasks XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 42: Sfs Short Display
SFS list. n-m displays reports n through m inclusive. For example, entering 10-15 displays the tenth through fifteenth report entries in the list. Note The default status file size is 100 reports. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 43: Sfs Complete Display
The SFS Short Display (refer to figure 2-2) can be selected instead of the SFS Complete Display. The default status file size is 500 reports. Displaying more than 500 reports may cause the PC UI to behave unpredictably. Either XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 44: Sfs Print
Copies: 1 - 32767. Enter the number of copies of the SFS printout you want. Entries: Enter the range of report entries you want printed. Use the following options: All prints the entire list of SFS report entries. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 45: Sfs Save
For example, typing 5 and pressing the <ENTER> key (or selecting the Apply header button) saves the first five report entries in the SFS list. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 46: Sfs Clear/Create
Frequency flags determine how many times warning flags are displayed. The default number of frequency flags is 3, meaning a warning flag is displayed three times to notify you that the status file is nearly full. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 47: Sfs Format
SFS Search, selected from the Accounting window, searches for an existing status file. If no status file is found, you are prompted to create a new one using SFS Create. There is no window for this task. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 48: Activity Report
Header buttons Print/Clear: The Print/Clear header button prints the information in the Activity Report log and clears the log. Print: The Print header button prints the Activity Report log without clearing it. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 49: User Report
(since the last Clear) for each department/JDL that has been previously entered into your site's accounting file. This information cannot be viewed on the PC UI; it must be printed for viewing. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 50 TASKS$.JDL is a name under which accounting information is accumulated for printing done by system tasks such as FDL, PDL, and the Editor. 2-10 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 51: Save Reports
Tape Device: TD0, TD1, TD2. Select/enter the tape device you wish to write the files to. Format: EBCDIC, ASCII. Select/enter the desired tape format. Density (BPI): 1600, 6250. Select/enter the tape density. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 2-11...
Page 52: Billing
This window displays and/or prints page count information for customer billing purposes. The billing summary includes the statistics shown in the Billing window figure 2-11. Header buttons Print: The Print header button prints a summary of billing information. 2-12 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 53: Files Windows
ESS floppy diskette, and on ESS tape. These features are non-print tasks which are typically performed by systems specialists. Files menu Figure 3-1. Files menu window showing selectable tasks XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 54: Display/Print
At sysgen, you may assign a tape device reference (TD0, TD1, TD2) to one of your tape devices, otherwise the system default assignments are used. Default assignments are as follows: TD0=9-track, TD1=26-track, and TD2=18-track. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 55 Comments are limited to 50 characters total. Leading and trailing comments must be separated by a comma. Any characters may be used in the String Comments, except for the comma (,), since it is used as a separator. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 56: Type
<CTRL><X> to cancel the file listing in the Display window. Parameters Disk ID: Default, DP0, DP1, DP2, DP3. Select/enter the disk number where the text file is located. File ID: Enter the file identifier in the form “file-name.file-type”. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 57: Copy
Output File ID: Specify the “file-name.file-type” that the input file should be copied to. If the output file-type is not specified, the file-type will be the same as the input file. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 58: Copy Labeled Tapes
Rewind: Rewinds the tape on the specified tape device. Unload: Rewinds and unloads the tape from the specified tape device. Parameters Tape Device: TD0, TD1, TD2. Select/enter tape device that you want the disk file written to. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 59: Labeled Tape To Disk
Review: Informs you if a file on tape has the same name as an existing file on disk and asks you if you want to overwrite the file. This window does not appear when copying from disk to tape. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 60: Copy Unlabeled Tapes
In order to write file to tape, a writable tape unit must be available on the system. No initialization process (such as, TAPE VOLINIT) is necessary when writing to an unlabeled tape. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 61: Disk To Unlabeled Tape
File ID: Enter the name of the tape file that you want copied to disk. Use the form “filename.filetype”. Format: EBCDIC, ASCII. Select/enter the format of the tape from which data is to be written. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 62: Copy To/From Floppy
The warning gives you the option to overwrite the destination file or cancel the operation. 3-10 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 63: Delete
Disk File ID: Enter the disk file(s) to be deleted. Use the form “file-name.file-type”. Masking is permitted. Floppy File ID: Enter the floppy file name and directory. Use the form filename.file type (for example UNIVAC.JSL). Masking is permitted. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 3-11...
Page 64: Review
Disk ID: All, DP0, DP1, DP2, DP3. Select/enter the disk containing the specified directory. File ID: Enter the name of the file and the file directory in which it resides. Use the form “file-name.file-type”. 3-12 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 65: Rename
Use this window to secure files on the system disk against unauthorized access. You must be at the proper logon level to access this window. Parameters File ID: Enter the file ID to be secured. Use the form “file- name.file-type”. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 3-13...
Page 66: Fix
File ID: Enter the name of a file and the file directory in which it resides. Use the form “file-name.file-type”. Only .FNT or .LGO file types may be specified. Notes Masking is allowed. Only files residing on the system disk may be fixed. 3-14 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 67: Scale
Interpress printing. Problem characters will typically be in 36- point fonts and larger. Notes The Scale task should not be interrupted while in progress. If an interruption occurs, press <ENTER> to resume the process. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 3-15...
Page 69: Disks Menu
Disks windows The Disks windows support disk management tasks. These tasks are non-print tasks which are typically performed by systems specialists. Disks menu Figure 4-1. Disks menu window showing selectable tasks XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 70: Backup
Others are shown only if the controller is configured with them. Tape Device: TD0, TD1, TD2. Select/enter the tape device that the disk will be saved to. Density: 6250, 1600. Select the tape density. Available for reel- to-reel tape only. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 71: Compress
Yes will send the appropriate Start command. The disk compress error report contains: Date and time File in error Unit Start logical block number Size Aborting the Compress process is not recommended. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 72: Download Controller (Psc)
SCSI: Selecting this option downloads the SCSI file, SCSIOS.SYS. RIP 0, RIP 1, RIP 2, RIP 3: Software is downloaded to all configured RIP boards that are selected. RIP options are available for RIP-configured sites only. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 73: File Check
Number of available sectors in groups of 3 or less Number of available sectors in groups of 5 or less Number of available spaces on disk XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 74: Purge
Parameters Disks and Print Files: Purges the entire disk, including the print file. Disks: Purges the entire disk, excluding the print file. Print Files: Purges only the print file. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 75: Reallocate
If the cylinder size you enter is less than 65, the system will exit the process and send a message that the requested print file size is too small. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 76 Default: Selecting this option creates a raster image file of 117 cylinders. Cylinders: Enter the size (in cylinders) of the raster image file you want created. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 77: Utilities Windows
FDL/PDL, invoking file editor functions (patch file, editor, font editor), and running a command file. You can also exit to DOS using the utilities windows. Utilities menu Figure 5-1. Utilities menu window showing selectable tasks XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 78: Compile Pdl
Replace: Selecting this option specifies that the PDL task may replace an existing job control file with a new output file of the same name. Rewind: Selecting this option rewinds a tape after a tape file is processed. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 79: Compile Fdl
Destination: Bin, Sample Tray. Select/enter the output destination for the sample form and listing/summary. Resolution: 300, 600. Select/enter desired print resolution of the sample form and listing/summary. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 80: Command File
Use this window to run a command file. After the command file- name and file-type (file-type is optional) have been entered, messages and commands are displayed in the message window. Parameters File Name: Enter command file-name (file-type). XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 81: File Id (Fid)
The Dump utility does not have an options window. Tasks are performed by keying in commands in a command line. The system must be idle and you must have the appropriate logon level to access this utility. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 82: Patch
Select the PC Editor option from the Utilities menu to edit files from a system disk, the PC UI hard disk, or a PC UI floppy diskette. The PC Editor is a text editor provided in addition to XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 83: Open/Edit
"wr" would fit on the line; the ap would appear on the next line, at the far left. xx xxxx xx xx x xxx xx xx x x x x x x x xxx x x wr XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 84 LPS line editor, any changes are made to the file residing on the controller disk, not to the retrieved file on the PC disk. • Use the PC Editor options to edit an controller file. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 85 (<), spaces, or multi-national characters. The following are MS_DOS reserved words and cannot be used as PC file names: CLOCK$, CON, AUX, COMn (where n = 1-4), LPTn (where n = 1-3), NUL, and PRN. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 86: Save As
Paste: Select this header button to copy the contents of the paste buffer to the cursor location. Any highlighted text at the cursor position in the file being edited is deleted when the 5-10 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 87: Search/Replace
List Files: Selecting this header button updates the file list display according to the current device option and the List Files field. Apply/Close: Select this header button to save the file and close the window. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 5-11...
Page 88 Header buttons Search Next: Select this header button to start searching for the string specified in the Search For field. If the search is successful, 5-12 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 89: Merge
15,000 lines, the merge is aborted, the file is truncated at that point, and an error message is displayed. After the merge, the cursor appears at the end of the merged text. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 5-13...
Page 90: Single File Transfer
Control Processor (FCP) and disk space availability dictate the destination of the transferred file. Note For information on performing this task, refer to the “Managing LPS Resources” chapter of the 4635 LPS Operations Reference. 5-14 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 91: Pc File Transfer
PC Hard Disk Display...: Select this option from the header auxiliary menu to open the PC Hard Disk Display window. Refer to figure 5-12, Utilities>PC File Transfer>PC Hard Disk Display window, below. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 5-15...
Page 92: Pc Floppy Display
The length of time it takes to transfer or copy a file depends upon the file size. The console log print option and the PC Editor functions involving the ESS are not available until the transfer is completed. 5-16 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 93 Description This window displays the contents of the PC UI floppy diskette. If no floppy diskette is loaded or no files exist on the floppy diskette, the window remains empty. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 5-17...
Page 94: File Information
Line Numbering: 0 ASCII (UNIX) Record Size: 0 Line Numbering: 0 EBCDIC Record Size: 0 Line Numbering: 0 Record Size: 80 Line Numbering: 8 BINARY Record Size: 0 Line Numbering: 0 5-18 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 95: Finishing Device Exerciser (Fex)
Apply/Close: Selecting this header button performs the Finishing Device Exerciser (FEX) task and closes the window. Apply: Selecting this header button or pressing the enter key performs the Finishing Device Exerciser (FEX) task. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 5-19...
Page 96: Image Dump Utility (Imd)
Finisher Functions: - Functions #1 and #2 are dependent on the configuration of your system and are a result of the Output command of PDL. Check with your system administrator and the Xerox 4635 LPS Print Description Language Reference for more information. Image Dump Utility (IMD) Figure 5-16.
Page 97: Dump
All fixes all image files including Interpress 1.0, 2.0, and RES format. Without the All selection, only Xerox Interpress 1.0 image files will be fixed. Scanlines: - You specify in these boxes the range to dump or print the image data.
Page 98 To return to object mode windows from DOS mode, enter manui at the DOS prompt. Exit to DOS is unavailable when the system is performing critical functions like file transfers and Audit logging. 5-22 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 99: Job Control Windows
For step by step descriptions of how to perform Job Control operator tasks, refer to the “Job control tasks” section of the 4635 LPS Operator Guide. Job Control menu Figure 7-1. Job Control menu window showing selectable tasks XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 100: Abort
If an aborted job had already begun printing, the output is appended with an accounting sheet which indicates that the job was aborted and that the printed job is incomplete. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 101 When aborting a non-print task, the system discontinues the currently active non-print task, if that task accepts the Abort command. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 102: Reset
The host remains online. If a HIP job is printing, Reset causes HIP to abort the job. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 103: Align
Dots: Enter a new dot position value. The dot position can be 0 through 1499. Notes Once the alignment values for one paper size are set, the system extrapolates the alignment values for the other paper sizes supported on the system. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 104: Print Darkness
Figure 7-6. Job Control>Lead Edge Screen message window Select the Yes header button to continue with the lead edge screen task. Select the No header button to cancel the task. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 105 Selecting the Stress option impacts the copy quality of the lead edge solid area more than the Normal setting because it applies a higher screen frequency to the area. The Lead Edge Screen feature applies across jobs. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 106: Micr Control
The current Bar Code Reader mode is displayed as: • Reader: On or • Reader Off. A confirmation window will ask if you wish to stop the output in order to change the Bar Code Reader mode. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 107: Sample Fonts/Forms/Logos
This command is accessible in Log level 2 and above. Refer to the Xerox 4635 LPS Operator Guide and the Xerox 4635 LPS PDL/DJDE Reference for more information on the Bar Code Reader setup.
Page 108: Sample Images
Scaling Factor: Enter an enlargement or reduction value. An image can be enlarged by up to 8 times its original size or reduced as small as 1/8 of its original size. 7-10 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 109: Fonts/Forms/Graphics
No single printed page may call for more than 128 graphics. This number must also include all graphics used on a form for the page, if a form is used. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 7-11...
Page 110: Input/Output-Stop, Continue, Sample
To continue printing, you may also press the Continue button on the printer control console. To print a sample, you may also press the <SAMPLE> key on the keyboard, or press the Sample button on the printer control console. 7-12 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 111 A print job must be in output processing in order to obtain a sample print. Also, you may not print samples when the sample tray is the output destination for a job. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 7-13...
Page 113: System Control Windows
For step-by-step descriptions on performing specific System Control tasks, refer to the “System control tasks” section of the 4635 LPS Operator Guide. System Control menu Figure 8-1. System Control menu window showing selectable tasks XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 114: Change Logon Class Level
The password is not displayed as it is being entered. Asterisks are displayed to represent the characters as they are entered. Entering the correct password gives you access to the new logon level's features. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 115: Change Password
Parameters Enter the new password. The password is not displayed as it is entered. You must confirm the change by reentering the new password. Figure 8-3. System Control>Change Password window XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 116: Restrict Command Usage (Rcu)
In order to use a command, you must be logged on to a class level greater than or equal to the specified class level for the command. Therefore, you can restrict only a command that you are authorized to use. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 117: Restrict Pc Features
Class Level: Enter the lowest log level at which the specified feature can be accessed. You cannot enter a log level higher than the current log level. Note Applied restriction levels are maintained across a power down of the PC UI. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 118: System Version
Attention light still flashes when the printer stops. Parameters Steady Light: Enabled. Select this button to enable the Steady Attention light located on top of the printer. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 119: Energy Saver
Energy Saver mode. Energy Saver mode is begun only if there are no Print Tasks active. The timer is reset if a task is activated before the Time Out Period has elapsed. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 120: Set Date/Time
It should not be necessary to set the Date/Time after a power failure or power-off (the system clock is battery run); however, you might want to change the Time after Daylight Savings and Standard Time changes. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 121: Substitute Device
(sysgen). Default substitutions are Reel for Tape, and CTS for Cartridge. The system must be idle to perform this task; a utility task cannot be running either. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 122: Print
The console log allows you to review system information that can help you determine the reason and any actions to take when the 4635 LPS appears to have a problem. The following items are contained in the console log: •...
Page 123 Convert: Select this header button from the auxiliary menu to convert the specified log to other formats, such as ASCII. Refer to figure 8-19, System Control>Console Log>Convert window. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-11...
Page 124 Start Hour: Enter the starting hour (0-23) for the console log display. Display...: Selecting this header button displays the Console Log Display window. The console log is displayed using the currently selected language. 8-12 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 125 A confirmation window displays asking you to confirm or cancel the console log print request. The console log is printed using the currently selected language. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-13...
Page 126: Stop Print
Stop Print: Select this header button to stop the printing of the console log before the LPS starts printing. If printing has already begun, use the JOB CONTROL>ABORT function. (Refer to figure 7-2.) 8-14 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 127: Save
Save to: You can save the console log to either the hard disk (system disk) or a floppy disk. If saving to floppy disk, use a pre- formatted 3.5-inch 1.44 MB double-sided, high-density disk. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-15...
Page 128: Empty
File Name field of the Console Log window. A delete confirmation window opens with the following options. Yes: Deletes the console log. No: Cancels the delete operation. Figure 8-18. System Control>Console Log>Delete confirmation window 8-16 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 129: Convert
Messages are displayed informing you that the console log will be overwritten. Messages are displayed to indicate when the console log is 70%, 80%, 90%, and 100% full. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-17...
Page 130: Problem (Tem)
You will need to report this code when calling for service. Refer to the “System Control Tasks” section in the 4635 LPS Operator Guide for a step-by-step description of how to use the TEM mode Problem task, and for more information on calling for service.
Page 131: Audit Log
Audit logging is triggered by BTEXT commands in JSL or DJDE. Refer to the Xerox 4635 LPS PDL/DJDE Reference for information on setting up the BTEXT. For more details on how to Audit a job please refer to the Xerox 4635 LPS Operations Reference manual. Header buttons List - Selecting this header button lists all logs of reports or jobs in the menu field in the lower left corner of the window.
Page 132 The ’Stale Date’ column gives the date that that log becomes stale and can be overwritten. • The ’Errors’ column gives the error codes of errors contained in that log. Refer to List logs: With: parameters. 8-20 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 133 Error code ’D’. Reconciliation Errors Logs with Expected monetary values different than actual monitary values. Error code ’R’. Sequence Errors Logs with document numbers (Bar codes) not in sequence. Error code ’S’. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-21...
Page 134: Audit Log Print Options
Defaults for the other options can be set in the Audit Log Default Options window. For a detailed description of how to read the report refer to the Xerox 4635 LPS Operations Reference manual. Header buttons...
Page 135 - - - - - - - - - - - - - - - - - - - - - Good Sheets Amount Delivered Purged Sheets: Actual: 22.00 Sheets Removed: Expected 20.00 Waste Sheets Fes: Difference: 2.00 Total Sheets Fed: ********************************************************************************************************* XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-23...
Page 136 Detail : Making this selection will print the heading, the details, and the trailer. See the figure on the preceding page. Refer to the Xerox 4635 LPS Operations Reference for more information about the reports. Content: - There are two buttons for selecting the content of the report.
Page 137 • -Purge/Jam/Operational After - Puts the purge, jam, and operational details after the rest of the body details. This is always selectable whether or not ’All’ contents are selected. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-25...
Page 138: Audit Log Display Options
Apply - There is no Apply/Close header button. This is done so the user can perform a redisplay on the same log with different settings. The Close header button must be selected when you have finished using this window. 8-26 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 139 The Stop Display header button stops the display and closes the Audit Log Display window. The Stop Display header button is only available while the “Please Wait! Audit Log is being formatted.“ message is present. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-27...
Page 140 • Backward - is used to search from where the last string of characters was found to the beginning of the file. 8-28 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 141: Audit Log Save
Destination: - The user identifies the name that the log will be given on the destination device. Device: - The user will identify the device to which the log is stored. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-29...
Page 142: Audit Log Administration
If a job containing 100 reports needs to be deleted, it can be deleted as individual reports or as a job. When deleting as a job, all remaining reports in that job are deleted. 8-30 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 143 This window will first appear after the disk reaches 86% full and will reappear every additional WHOLE percentage thereafter. This condition is checked at the completion of every report or after every 1000 records logged againts any report. The starting XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-31...
Page 144 Defaults . . . - Selecting this header button of the Audit Log Administration window enables the user to set defaults for the Audit Log through the Audit Log Defaults window. 8-32 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 145: Audit Log Defaults
A reconciliation error is caused by a mismatch of the monetary value expected and the monetarty value received. Refer to the Xerox 4635 LPS PDL/DJDE Reference for more information. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 146 Display the Log - The Audit Log Display window will appear and the log with the error will be displayed. After closing the Audit Log Display window this window will appear again to enable selecting the desired action. 8-34 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 147 Sequence error is the error that occurs when the actual barcode scanned does not match the next number in the sequence. Refer to the Xerox 4635 LPS PDL/DJDE Reference manual for more information on how to define sequence data.
Page 148 • Reconciliation Errors - Show reconciliation error information in the detail section. Purge/Jam/Operational After - Puts the purge, jam, and operational details after the rest of the body details. 8-36 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 149: Stale Date
Audit Logged job. The stale date conditions are set up through the BTEXT commands in the job stream. Please refer to the Xerox 4635 LPS PDL/DJDE Reference manual for more details on BTEXT commands. One of three selections needs to be made when this window appears.
Page 150 Xerox Print Services Manager software. Please refer to the 4635 Installation Planning Guide for hardware requirements for use of the remote terminal option. Use this task to transfer control of the 4635 from the PCUI to a remote device. Note: This selection will only appear if the required software options have been loaded.
Page 151: Exit To Dos
DOS applications cannot be run from within the PC UI windows mode of operation. You must exit to DOS to run DOS applications. Figure 8-35. System Control>Exit to DOS confirmation window XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-39...
Page 153: Notepad Window
256 characters.) A confirmation window displays to confirm that you want to save the changes you have made to the note. Saving a note with a currently existing name will overwrite the old note. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 154 Within the Notepad window, pressing the <ENTER> key saves the note. To start a new line of text while writing a note, press and hold the <SPACEBAR> until the cursor wraps around to the next blank line. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 155 Paper size measuring 250 by 353 mm. background job Low-priority job, usually batched, that is executed automatically as system resources become available. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE GLOSSARY-1...
Page 156 Block length is usually invariable within a system and may be specified in units such as records, words, computer words, or characters. GLOSSARY-2 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 157 2. To write a list of instructions (software) to cause the product/system to perform specified operations. code conversion Translation of one type of character or symbol code to another. collate To arrange or assemble into ordered sets. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE GLOSSARY-3...
Page 158 Term used to indicate jobs in which multiple copies of a report will contain different data, as with paychecks and banking statements. GLOSSARY-4 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 159 To detect and correct errors in a program. decompose To break down into component parts, such as when Interpress breaks down a Font Interchange Standard (FIS) master to compile font information. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE GLOSSARY-5...
Page 160 8-bit coded characters. It can accommodate 256 characters. edgemarking Use of graphic objects, usually lines or boxes, that bleed off the edge of the physical page. See also physical page. GLOSSARY-6 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 161 Hardware devices or software packages that allow the printer to perform in a specified manner. Ethernet Xerox local area network (LAN) th at allows data to be transmitted by cable from one device to another, enabling it to share the network.
Page 162 Feeder tray capable of holding 2500 sheets of 20 pound/75 gsm paper. The high-capacity feeder trays are the primary paper supply for the 4635 LPS. They are located in the bottom half of the feeder/stacker modules. high-capacity stacker. Stacker bin capable of holding 2500 sheets of 20 pound/75 gsm paper.
Page 163 Interpress Xerox standard that defines digital representation of lines for printing. Interpress documents can be printed on any sufficiently powerful printer equipped with Interpress print software. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE GLOSSARY-9...
Page 164 The movement of paper through the printer in the direction of the paper length (the longer side of a sheet of paper). legal size Sheet the standard size of legal briefs, 8.5 by 14 inches. GLOSSARY-10 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 165 In the Xerox printing systems environment, a formatted page that is smaller than the physical page. A logical page is defined by an origin, thus allowing more than one logical page to be placed on a physical page.
Page 166 MICR fields are often imprinted on bank checks before processing. mode Manner in which an activity or process is carried out. GLOSSARY-12 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 167 Source file converted into machine language (binary code). object mode For the 4635 LPS, the processing method of the PC UI which uses the mouse, windows, and icons. The PC UI operates in either the object mode or in the terminal emulation mode (TEM).
Page 168 Unlike other types of programs, it does not run to an end point and stop. The operating system of a Xerox LPS is referred to as the operating system software (OSS). operation Well-defined action that, when applied to any permissible combination of known entities, produces a new entity.
Page 169 12-pitch (12 characters per inch) spacing is called elite. 2. The number of page images placed on the xerographic belt during one revolution. The 4635 LPS operates in a multi-pitch mode, allowing the mode to be adjusted according to the width of the paper used.
Page 170 In setting a separation boundary through the Bin Full Criteria task, report refers to a subset of a job (a job may consist of one or more reports). GLOSSARY-16 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 171 The movement of paper through the printer in the direction of the paper width (the shorter side of a sheet of paper). For the 4635 LPS, short-edge feed allows larger sizes of paper (up to 11 by 17 inches/279 by 432 mm) to be printed.
Page 172 Connected sequence of alphanumeric characters treated as one unit of data by a program. symbol Character used in a computer language to specify a particular function. GLOSSARY-18 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 173 The number of characters that can be stored on magnetic media, such as how close together data can be recorded. The Xerox LPS may use either 1600 bpi or 6250 bpi density magnetic media. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 174 Application that prints two logical pages on one side of a physical page. typeface 1. All type of a single design. 2. Set of characters with design features that make them similar to one another. GLOSSARY-20 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 175 9-track tape) to prevent stored data from being modified, written over, or erased. xerographic engine Component of a printer that develops an image, transfers it to paper, and fuses it for output as hardcopy. XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE GLOSSARY-21...
Page 176 CD/IG character dispatcher/image generator control module copy modification entry character mapping table characters per inch central processing unit carriage return command status interface customer support representative GLOSSARY-22 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 177 Extended Binary Coded Decimal Interchange Code ECMA European Computer Manufacturers Association emulator trap ENET Ethernet network end of tape electronic publishing electronic subsystem, also referred to as the system controller forms control buffer XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE GLOSSARY-23...
Page 178 HFDL host forms description language Host Interface Processor hpos horizontal positioning International Business Machines Corporation Interpress font utility image generator image generator module GLOSSARY-24 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 179 Laser Printing System logical unit number management information systems XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE GLOSSARY-25...
Page 180 PROM programmable read-only memory printer subsystem controller point PWBA printed wiring board assembly 1/4 inch cartridge random access memory raster image processor GLOSSARY-26 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 181 TL/DL text line/display list top of form tracks per inch test pattern job total xerographic convergence Universal Character Set UCSB Universal Character Set Buffer user interface virtual memory XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE GLOSSARY-27...
Page 182 Xerox Network Systems XPAF, XPF Xerox Printer Access Facility XPMF-VMS Xerox Print Management Facility - VMS Version XPPI Xerox Pen Plotter Interface Xerox Publishing System GLOSSARY-28 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 183 Convert, Console Log, 8-17 Mode, 6-9 Copy Buffer/Version, 6-31 Labeled Tapes, 3-6 to 3-8 button/check boxes, selecting, 1-15 Review, 3-12 To/From Floppy, 3-10 to 3-11 Unlabeled Tapes, 3-8 to 3-9 window, 3-5 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE INDEX-1...
Page 184 Feed Mode, 6-7 to 6-8 image degradation, 7-7 feeder trays, 6-4 to 6-5 index bar, 1-14 Feeding Configuration, 6-13 to 6-14 input Feeding/Finishing Configuration, 6-14 fields, 1-14 job source, 1-9 INDEX-2 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 185 Feeding/Finishing Configuration, 6-14 Finishing Configuration, 6-12, 6-14 No header button, 1-13 Notepad Abort, 6-32 to 6-33 icon, 1-12 Jobs Status, 6-33 to 6-34 window, 9-1 to 9-2 window, 6-29 to 6-31 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE INDEX-3...
Page 186: Printer Status
Restrict Command Usage (RCU), 8-4 Images, 7-10 to 7-11 Restrict PC Features, 8-5 Save Set Date/Time, 8-8 As, 5-11 to 5-12 Substitute Device, 8-9 Console Log, 8-15 System Version, 8-6 Reports, 2-11 INDEX-4 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE...
Page 187 Search/Replace, 5-12 to 5-13 window, 5-6 to 5-9 PC File Transfer, 5-15 to 5-19 PC Floppy Display, 5-17 to 5-18 PC Hard Disk Display, 5-17 Single File Transfer (SFT), 5-14 XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE INDEX-5...

Xerox 4635 User Interface Reference

Introduction

1 Using the PC UI

2 Accounting Windows

3 Files Windows

5 Utilities Windows

7 Job Control Windows

8 System Control Windows

Quick Links

Need help?

Questions and answers

Related Manuals for Xerox 4635

Summary of Contents for Xerox 4635

Table of Contents