Xerox 4635 Operator's Manual page 246

MAINTENANCE TASKS
11-6
5. Place the removed cap over the opening on the end of the
full waste container.
Figure 11-7. Placing the cap on the waste container
6. Slide a new, empty, dry ink waste container into the printer
until the container stops.
Note: Do not remove the cap from the new container.
Figure 11-8. Inserting the new dry ink waste container
7. Close the printer doors.
Note: If any dry ink gets on your hands, wash them with soap
and cold water. Heat sets the ink permanently. If any dry ink
gets on your clothes, brush them with a dry paper towel or a
stiff-bristled brush. If this does not remove the ink immediately,
launder with detergent and cold water. Dry cleaners should be
told that the spot is dry ink for a printer, so they will not use a
solvent that sets the stain.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE