Xerox 4635 Operator's Manual page 4

Notice
iv
• Always place equipment on a solid support surface with
adequate strength for the weight of the machine.
• Always use materials and supplies specifically designed for
your Xerox equipment. Use of unsuitable materials may
result in poor performance and can possibly create a
hazardous situation.
• Never move or relocate either the printer or the system
controller without first contacting Xerox for approval.
• Never use a ground adapter plug to connect equipment to a
power source receptacle that lacks a ground connection
terminal.
• Never attempt any maintenance function that is not
specifically described in this operator guide.
• Never remove any covers or guards that are fastened with
screws. There are no operator-serviceable areas within these
covers.
• Never override or "cheat" electrical or mechanical interlock
devices.
• Never use supplies or cleaning materials for other than their
intended purposes. Keep all materials out of the reach of
children.
• Never operate the equipment if unusual noises or odors are
noticed. Disconnect the power cord from the power source
receptacle and call Xerox service to correct the problem.
• Always follow all warnings and instructions marked on or
supplied with the product.
• Never allow anything to rest on the power cord. Never
locate the equipment where persons will walk on the cord.
• Never use an extension cord between the printer power cord
and an electrical outlet.
• Never place containers of coffee or other liquids on the
equipment.
If you need any additional safety information concerning the
equipment or materials Xerox supplies, call Xerox Product Safety
at the following toll-free number:
1-800-828-6571
This publication may contain descriptions of concepts and
features not currently available for your Xerox Laser Printing
System. Consult your Xerox sales representative or your
operating system software program description for additional
information.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE