Performing Operator Tasks Through The Pc Ui; Performing Tasks Through Windows; Entering Commands Through The Command Line/Message Window; Key-In Conventions - Xerox 4635 User Interface Reference

USING THE PC UI

Performing operator tasks through the PC UI

Performing tasks through windows

Entering commands through the Command Line/Message window

1-22
click once with the left mouse button or press the <ESCAPE>
key, then the <ENTER> key. The header area of the window is
now highlighted, and you can select options or enter commands
in the window. If the window was underneath another window
on the desktop, it now appears on top.
Note: To activate a menu window, click once on a Move/Resize
target, rather than the work area of the window.
The PC UI gives you two options for performing operator tasks:
• Selecting tasks through windows
• Entering commands through the Command Line/Message
window.
Follow the procedures outlined earlier in this chapter to open
Menu and Task windows and select options using the PC UI
windows.
Use the Command Line/Message window if you want to perform
a task by entering commands rather than selecting options in a
window. Place the cursor in the Command Line/Message
window (refer to figure 1-8) and click once with the left mouse
button or press the <ESCAPE> key, then the <ENTER> key to
activate the window. Then enter the command at the cursor.

Key-in conventions

Follow these conventions when entering commands:
• The system is ready to receive commands when
appears in the command line/message window.
FOR COMMANDS
• All commands may be abbreviated to the first three
characters or spelled out fully and correctly.
• Commands are executed by pressing <ENTER>, except for
those entered by the function keys.
• Spaces or commas may be used to separate command
parameters.
• Error and information messages from the system are
preceded by OS and a four-digit code indicating the severity
level. Refer to the LPS Message Guide for information on a
particular error message.
• A message acknowledging your request appears as positive
feedback to you. An error message
appears when a command is entered
PLEASE RE-ENTER
incorrectly.
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE
OS1000 READY
OS2710 INVALID COMMAND,