Printer Configurations - Xerox 4635 Operator's Manual

Printer configurations

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
SYSTEM OVERVIEW OF THE 4635 LASER PRINTING SYSTEM
The 4635/4635MX LPS is available in the following five
configurations:
1. Printer + Inverter Feeder Stacker + Feeder Stacker
2. Printer + Inverter Feeder Stacker + Feeder Stacker + Bypass
Transport
3. Printer + Inverter Feeder Stacker + Feeder Stacker + Feeder
Stacker
4. Printer + Inverter Feeder Stacker + Feeder Stacker + Feeder
Stacker + Bypass Transport
5. Printer + Inverter Feeder Stacker + Feeder Stacker + Feeder
Stacker + Feeder Stacker
Each of these configurations can have the following printer
options:
• 7X10 enablement kit
• Bar code device
• Input enablement device
Notes:
• The input enablement device is not available on the last
configuration: Printer + Inverter Feeder Stacker + three
Feeder Stackers.
• Each of the configurations and options above is available
with the 4635MX system.
Refer to the "Printer options" section earlier in this chapter for
information about each of the options above.
Figures 1-18 through 1-22 illustrate each of the five printer
configurations available.
Note: Figures 1-18 through 1-22 show the 4635 LPS with the
optional bar code device.
Figure 1-18. Printer + Inverter Feeder Stacker + Feeder
Stacker
1-19