Load A Floppy Disk; Unload A Floppy Disk - Xerox 4635 Operator's Manual

Load a floppy disk

Unload a floppy disk

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
1. Before inserting a floppy disk into the floppy disk drive,
check that the lever is in the open (vertical) position.
2. Insert the floppy disk label side left until the jacket is solidly
against the stops.
3. Move the lever clockwise to the closed (horizontal) position.
Figure 7-42. Loading a floppy disk
1. Lever
2. Floppy disk drive
3. Floppy disk
1. To remove the floppy disk from the floppy disk drive, move
the lever counterclockwise to the open position. The floppy
disk should pop out slightly.
Figure 7-43. Turning the lever to open position
2. Place the floppy disk in its protective envelope.
OFFLINE PRINTING TASKS
7-27