Load A 1/4 Inch Cartridge Tape; Unload A 1/4 Inch Cartridge Tape - Xerox 4635 Operator's Manual

Load a 1/4 inch cartridge tape

Unload a 1/4 inch cartridge tape

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
Press the Release button. The door opens partially.
2. Manually open the door completely. Insert the cartridge into
the feed slot with the label facing to the left.
3. Close the door. The tape is automatically loaded and
positioned at BOT.
The LED indicator is green when the tape is operating properly.
If the indicator is flashing red, call for service.
Figure 7-40. Inserting a cartridge
1. Use the Rewind Tape task to rewind the tape. (Refer to the
"Rewind/unload tape" section of this chapter.)
2. Press the Release button to open the door. Lower the door
manually.
3. Carefully remove the cartridge.
4. Close the door to prevent dust accumulation.
OFFLINE PRINTING TASKS
7-25