Xerox 4635 Operator's Manual page 185

HIP Jobs Status task through
system controller terminal (non-U.S.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
•
•
•
•
3. Select the Show header button. The display box in the
window work area now reflects your Show field selection.
markets only) Enter the following command:
HIP SHOW JOBS [parameter]
This command displays the current status of the selected jobs in
the HIP jobs queue as well as the current status of the HIP
processor. The format of the display depends on the parameter.
The parameter options are as follows:
ABORTED
ACTIVE
ALL
CANCELLED
COMPLETED
CONTINUE
PAGE[n]
PENDING
PRINTED
SENT
STORED
SUMMARY
Printed. Display all jobs in the printed state, that is,
Printed or Truncated.
Sent. Display all files sent to the host.
Stored. Display all files stored by the host.
Summary. Display a summary of the job queue.
Note: The default of the Show option is "Summary." A
summary of the job queue is displayed when you first
open this window.
Display all jobs that have been aborted.
Display all jobs in the active state: QUEUED,
ACTIVE, OQUEUED, or PRINTING.
Display all jobs in all queues.
Display all jobs that have been cancelled.
Display jobs in a completed state: PRINTED,
STORED, SEND, or ABORTED.
Continue a previously requested display if all
jobs in the queue were not displayed.
Divide the queue up to 20 jobs, which are
ordered from the oldest completed job to
newest completed job received.
Display all jobs in the pending state: PENDING
or RECEIVING (but not submitted to the OCS).
Display the jobs in the printed state: PRINTED or
TRUNCATED.
Display all files that have been sent to the host.
Display all files that have been stored by the
host.
Display a summary of the job queue. (Refer to
figure 8-6.)
HIP PRINTING TASKS
8-11