Bar Code Operating Procedures; Introduction; Laser Safety - Xerox 4635 Operator's Manual

Introduction

Laser safety

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE

14. Bar code operating procedures

The Bar Code feature allows processing of bar code data streams
with the ability to cross-check the system UI, the ESS and the
IOT. This cross-checking ensures that any bar code sheets
printed have been accounted for by each component of the
system.
WARNING: Use of controls or adjustments, or performances
other than specified may result in hazardous light exposure to
the eyes. Mirrors and/or Optical Devices should not be used
around the Laser and should not be used to view or deflect the
Laser Beam.
The 4635/4635MX Laser Printing Systems are certified to comply
with Laser Performance Standards set by the U.S. Department of
Health, Education and Welfare as a Class 2 product. This is a
class of laser products that does not emit hazardous light
radiation. Class 2 rating is permissable only because the laser
beam is totally enclosed during all modes of customer operation.
14-1