Stopping The Printing Of A Console Log; Saving The Current Console Log - Xerox 4635 Operator's Manual

SYSTEM CONTROL TASKS
4-20

Stopping the printing of a console log

To stop the printing of a console log, select the Stop Print
header button. If the console log has already started printing,
use the <STOP> key to stop printing.

Saving the current console log

1. Select the "Save" option from the Console Log window's
header auxiliary menu to open the Save window.
Figure 4-20. Save window
2. Enter a file name for the console log in the Save Console Log
as field.
Note: The file name can be up to eight characters in length,
and can consist of letters or numbers. Punctuation
characters (such as a comma) or spaces should not be used
in the name.
3. Select either:
• Hard Disk. Save the console log on the system disk.
• Floppy. Save the console log on a formatted floppy disk.
4. Select either:
• Apply/Close. Save the file and close the window.
• Close. Cancel the save request and close the window.
Note: If the PC UI cannot save the whole console log due to
insufficient space, an error message displays and no entry is
saved.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE