Xerox 4635 Operator's Manual page 126

JOB CONTROL TASKS
5-14
• To print a sample of graphic images:
1. Select "Sample Images" from the Job Control menu to
open the Sample Images window.
Figure 5-11. Sample Images window
2. Either:
• Enter the graphic's image file name in the File ID field
to print a sample of a graphic stored on the system
disk.
• Leave the default value of *.IMG to print samples of all
graphics at 300 spi.
3. You have the following print options:
• To print a comprehensive descriptor page with the
graphic sample(s), select the Comprehensive button.
If you don't select this option, an abbreviated
descriptor page is printed.
• To print an enlarged or reduced version of the graphic
sample(s), enter the enlargement or reduction value in
the Scaling Factor field. For example, to print a
graphic image reduced by 25 percent, enter 1/4 in the
field.
Note: An image may be enlarged by up to a factor of
8 or reduced as small as 1/8.
• To specify where the graphic prints on the page, enter
the vertical and horizontal positions in the appropriate
fields.
• To have the samples(s) print in landscape orientation,
select the landscape option from the auxiliary menu
next to the Orientation field. Otherwise, the samples
print in portrait orientation.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE