Copy Unlabeled Tapes - Xerox 4635 Operator's Manual

FILE CONTROL TASKS

Copy unlabeled tapes

Copy Unlabeled Tapes task
through windows
10-10
Use this task to copy files from:
• System disk to unlabeled tape
• Unlabeled tape to system disk.
1. Select "Copy Unlabeled Tapes" from the Files menu to open
the Copy Unlabeled Tapes window.
Figure 10-9. Copy Unlabeled Tapes window
• To initialize a tape, select the Initialize header button, the
Initialize 1600 bpi header button, or the "Initialize 6250
bpi" option from the header auxiliary menu. (The Initialize
and Initialize 1600 bpi buttons perform the same
function.)
• To copy files:
a. Select the Copy option you want.
Note: The default is Disk to Tape.
b. Select the tape device from the Tape Device auxiliary
menu.
c. If you are copying from tape to disk, select the disk
unit you want the file copied to, from the Disk ID
auxiliary menu.
Note: You may use the default disk unit if you
prefer.
d. Select the recording format of the tape being input.
— The default is EBCDIC
— You can select ASCII from the Format auxiliary
menu.
e. Enter the file name to be copied to or from the
system disk in the File ID field. The format is file-
name.file-type.
f. Select the Apply or Apply/Close header button to
begin the Copy task.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE