Honda CBR600F4i Series Service Manual page 95

MAINTENANCE
CLUTCH SYSTEM
Measure the clutch lever free play at the end of the
clutch lever.
FREE PLAY: 10 - 20 mm
(3/8 - 13/16 in)
Minor adjustments are made using the upper adJuster
at the clutch lever.
Loosen the lock nut an d tu, n the adjuster.
NOTICE
Tho adjusror may be damaged if ir is positioned coo
far out, leaving minimal thread engagement.
If the adj uste r is threaded out near its lim it and t he
correct free play cannot be obtained, turn the adjuster
all the way in and back out one t urn.
Tighten the lock nut and make a major adjust ment as
described
as
follow.
Major aujuslr 11,rnl, are p,nlurrn!!d
a l
the clutch arm.
LoosP.n thP. loc:k nut anrl tu rn the adjusting nut to
adjust the free ploy.
Hold the adjusting nut secure ly while tighteni ng t he
lock n ut.
If proper free play cannot be obtained. or the cl utch
slips during test ride. disassemble an d insµ!!cl Lhe
clutch (see section 9).
SIDE STAND
3-26
Su pport the motorcycle on a level surfac:e.
Check the side stand spriny for fatigue ur damage.
Check the side stanrl assP.mhly for movement an d
lubricate the side stand pivot if necessary.
I
I
'