Honda CBR600F4i Series Service Manual page 189

FUEL SYSTEM (Programmed Fuel Injection)
5-76
Install the starter v alve asser11 bly into the valve hol e.
Tight en the st<1rtP.r valve lock nut to the specified
torque.
TORQUE: 2 N•m (0.18 kgf•m, 1.3 lbf•ft)
No.3/4 starter valve:
Com p ress the thrust spring and insta ll the No.3/ 4
starter valve arm onto the stllrtP.r va lves.
Install and tig hten th e starter vo lve orm mounting
screws tu the specified torque .
TORQUE: 1 N•m 10.09 kgf•m, 0.7 lbf·ft)
No.1/2 starter valve:
lnstoll the No.1/2 starte r valve arm to the M<1rter
valves.
Insta ll and t ighten the sta rter va lve arm mounting
screws to the specified to rr11re.
TORQUE: 1 N•m (0.09 kgf•m, 0.7 !bf.ft)
Install t he fast idle wox unit link arm and t ighten th e
screw tu the specified torque.
TORQUE: 1 N•m 10.09 kgf•m, 0.7 !bf.ft)
Inst al l the fast idle wax unit (page 5-73).
No.1/ 2 STARTER VALVE: