Honda CBR600F4i Series Service Manual page 267

CYLINDER HEAD/ VALVES
8-26
In case the cam sprockets w ere removed, tighten the
cam sprocket bolts to th e specified torque.
TORQUE: 20 N•m (2.0 kgf•m, 14 lbf.ft)
Turn the crankshaft clockwise one f ull turn (360') .:ind
tighten t he other t:am sprocket I.JOils.
In case the cam pulse generator rotor bolts were
removed, tighten the rotor l>olls to the spec if ied
torque .
TORQUE: 12 N•m (1.2 kgf,m, 9 lbf•ft)
RP.move the stopper tool from the cam chc1 iri l!msi on•
er lifter.
Insta ll o new seoling washer and tighten thP. sea l ino
l>olt.
Recheck th e va lve timing .
I
-
.
I
/
/
' ,,.-_; I
STOPPER TOOL