Honda CBR600F4i Series Service Manual page 180

FUEL SYSTEM (Programmed Fuel Injection)
Route the throt11\! uody sub-harness properly and
connect the injector conmir.tors and TP sensor con-
nector.
Connect thP. tast idle wax unit water hoses
to
t he unit,
t hen tighten the hose bands securely.
Install the throttle body un to the cylinder head.
I
NOTICE
I
Do not hold thP. fuel pipe on the rhrorrle body while
installing the throttle body.
Tight en the cylinrlP.r head side insulator bond so that
the insulator band d istance is 4
±
1 mm (0.2
±
0.04 in).
SUB -HARNESS INJECTOR CONNECTORS
~
~ ~.
WATER HOSES
~ , , )
4:: 1 mm
- ~ ' ' '·°' '"'
,,~-- ~
7
5-67