Honda CBR600F4i Series Service Manual page 108

Measurn th e s ide cl eara nce using a straight edge and
feele r gauge.
SERVICE LIMIT: 0.10 mm (0.004 in
)
ASSEMBLY
INNER ROTOR
OIL PUMP SHAFT
OIL PUMP COVER
OUTER ROTOR
DRIVE PIN
lnsloll the ovter
rotor w,rh its
punch mark fecmg
tl1e oil pump
cover.
Install the outer rotor into the oil pump body with its
punch mark facing the oil pump cover.
Install the inner rotor into the outer rotor w it h its drive
pi n groove faci ng the oil p11mp covP.r.
Install the oil pump shoft t hrough the inner rotor and
oil pump body.
Install the drive pin into t he hole in the pump shaft
and align the pin with the groove i n the inner roto r as
shown.
Install t he thrust washe r.
INNER ROTOR
LUBRICATION SYSTEM
OIL PUMP BODY
l~~
.,..,.
DOWEL PINS
OIL PUMP
4-7