Honda CBR600F4i Series Service Manual page 333

CRANKSHAFT / PISTON/CYLINDER
12-16
Apply molybdenum oil solution to th11 1:rankpi11 bear-
ing suriaces.
Install the bearing cap.
Make sure the marks on the caps are aligned with the
,narks on the co nnecting rods.
Apply oil to the connecti ng rod nut threads and seat-
ing surfaces.
lnstR II the connecting rod nuts and tighten the nuts
g rodually and alternately, then tighten them t o the
specified torque.
TORQUE: 25 N•m (2.6 kgf•m, 19 !bf.ft)