Honda CBR600F4i Series Service Manual page 130

Turn th!! ignition switch to "ON".
Measure t he voltage between the ECT sensor
connector terminal of the wi re harness side a nd
ground.
Connection: Pink/White
(+) -
Ground {-)
Standard: 4.75 - 5.25 V
Voltage exists
Mcosure the voltage at the ECT s!!nsor connec-
tor of th!! wire harness side.
FUEL SYSTEM (Programmed Fuel Injection)
Oul or range
Out of range
Voltage exists
Open or short circuit in Pi nk and Pink/White wire.
Loose o r poor contacts on the FCM c.onnP.ctor.
Ope n o r short c ircuit in Green/Orongc wire.
Loos!! or poor contacts on the ECM co nnP.c.tor.
Repl11cP. the ECM with
a
new one, and inspect it
again.
5-17