Honda CBR600F4i Series Service Manual page 181

FUEL SYSTEM (Programmed Fuel Injection)
Route the injector sub-harness referriny lite t:able and
harness routi ng (page 1-23).
C:onnect the throttle body sub horncss 10P (G ray)
connector.
'.,'a/ifom1!J type Connect the throttle body-to-EVAP purge control sole-
un/y. noid valve hose.
5-68
Route the throttle stop t:ontrol cable properly, install
the control knob to the clamp on the bypass hose.
Connect the throttlP. c..ahle P.nrls t o thP. throttle rlrnm.
lnstoll the throttle cable guide bracket to the throttle
body, then tighten the bolts to the specified to rque.
TORQUE: 3 N•m (0.35 l<gf•m , 2.5 lbMt)
Install the removed parts i n the reve rse order of
remova l.
THROTTLE STOP SCREW