Honda CBR600F4i Series Service Manual page 383

REAR WHEEL/ SUSPENSION
INSTALLATION
Install t he shock absorbe r into t he t r11me with t he
reserve tan k outl et facing to the left.
Install the upper and lower mou ntiny uull/11ut.
Tighten t he upper mount i ng n 11t to the specif ied
torque.
TORQUE: 44 N•m {4.5 kgf•m, 33 )bf.ft)
Tighten t he lowe r m o unliny nut to the specified
torque.
TORQUE: 44 N,m (4.5 kgf•m, 33 !bf.ft)
lnstoll t he reservoir into the reservo ir h11n c1.
Tighten t he band screw securely.
Install t he rem ovec1 r,11 rts in the rev erse order of
re mov al.
SUSPENSION LINKAGE
REMOVAL
14-12
Support the motorcycle usi ng
ll
hoist o r equ ivalent.
Re move the rulluwing:
- Shock abso rbe r lower m ou nti ng bolt/n ut
Shock link p late-to-swingarm bolt/nut
- Shock link plate-t o-shock link bolt/nut
- Shock link plates
UPPER MOUNTING BOLT/NUl
---
-,..._....,
Rl:: SERVOlll