Honda CBR600F4i Series Service Manual page 368

FRONT WHEEL/SUSPENSION/ STEERING
Install the fork legs (page 13-23).
Install the top bridge and steering stem nut.
Tigh ten the steering stem nut to the specified t orque.
TORQUE: 103 N·m (10.5 kgf•m, 76 lbf.ft)
In stall the steering stem nut cap.
Insta ll the front brak11 hose clamp, tighte,, the bolt to
the specified torque .
TORQUE: 10 N•m (1.0 kgf•m, 7 !bf.ft)
Install the horn unit assembly and tighten the mount
ing bolt.
Connect the horn wire connectors.
Connect the ignition switch 4P (White) connecto r and
secure the wires w ith the w ire band and c lamp (pa ge
1-23).
Install t he following:
- Front w h eel (page 13-13)
- Handlebar (page 13-5)
- Upper cowl (page 2 9l
STEM NUT CAP
W IRE CLAMP
WIRE BAND
13-33