Honda CBR600F4i Series Service Manual page 286

Pu ll the gearshift spindle assembly and thrust was her
out of th e crankcase.
Remove the following:
- Stopper
a,m
socket bolt
- Stopper arm
Return spring
- Washe r
- Dowel pins
- Socket bo It
- Gearshift cam
GEARSHIFT LINKAGE INSPECTION
Check the yearshift spindle l or Wtei~r, lfa111aytei ur
bends.
Check the return spring for fotig uc o r domoge.
GEARSHIFT LINKAGE INSTALLATION
Install the following:
- Washer
- Return spring
- Stopper arm
- Socket bo It
Tighten the st opper arm sor:kP.t holt to the specified
to rqu e.
TORQUE:
12 N•m (1.2
kgf•m, 9 lbf.ft)
CLUTCH/GEARSHIFT LINKAGE
RETURN SPRING
IT~ ~
' ~v
GEARSHIFT SPINDLE
9-13