Honda CBR600F4i Series Service Manual page 86

ENGINE IDLE SPEED
Inspect and adjust the idle speed after al l other
engine maintenance it ems have uee11 pe rformed
a11d are within specification.
The engine must be warm for accurate idle speed
inspection and adjustment.
Warm up t he enginP. for about 10 minutes ..
Turn the th rottle stop screw as requ ired to obtain the
specified idle speed.
IDLE SPEED: 1,300
;1:
100 rpm
RADIATOR COOLANT
Check the coula11t level in the reserve tank w ith the
engine running at normal ope rating temperat ure.
The level should be between the "UPPER" and
"LOWER" level lines.
It necessary, add the recommended coolant.
RECOMMENDED ANTIFREEZE:
Pro Honda HP Coo l.int or an equivalent hi gh qual i-
ty
ethylen e g lycol antifreeze cont ai ning co rrosion
p rot e<.1cio n inhibitors.
Remove the reserve tank filler cap a11d fill to t he
"UPPER" level li11e with a 1/1 mixture of distilled
water and antifree1P..
RP.install the filler cap.
COOLING SYSTEM
Remove the lower cowl and inner half cowl (page 2-4).
Check the radiator air passayes ru , clogs or dam age.
Straig hten any bent fins, and remnve insects, mud or
nther obstructions with compressed air o r low water
pressure.
Replace the radiator if the air f low is rP.stricted over
more th1rn 20% of the radiating surface.
MAINTENANCE
THROTTLE STOP SCREW
3-17