Honda CBR600F4i Series Service Manual page 126

FUEL SYSTEM (Programmed Fuel Injection)
Out of ra nge
Measure the voltc1ye uetween the term inals of
I------=:.._.,.
t he wire harness side.
Connection:
Light green/Yellow
(+) -
Green/Orange (-)
Standard: 4.75 - 5.25 V
Voltage exists
Turn the iy nitiun switch to " OFF".
Con nect the MA P sP. nsor 3P connector.
Disconnect t he ECM c.nnnectors.
Connect the test hnrncss to ECM connectors.
Turn th e ignition switch to "ON".
Measu re the vo ltage at t he test harness l!mni-
nals (pc1ye
5-9).
l=i~J
ll J f
J"
IO...!L.IJ \I 1'~Zll.11
It
Connection: B7
(+) -
B1 (-)
Standard: 2.7 - 3.1 V (760 mm Hg/ 1,013 kPa}
Out of ronge
Voltage exists
Open or short circuit in Light green/Yellow w ire.
Loose or poor contact on the ECM connectors.
• Faulty MAP sensor.
Replace the ECM with a new one, an d inspect it
again .
5-13