Honda CBR600F4i Series Service Manual page 379

REAR VifHEEL/ SUSPENSION
14-8
Inst all the driven flanye assemuly irilu L h e lefl wl11,,el
hub.
If the driven sprocket was removed, install the driven
sprocket and tighten the nuts.
TORQUE: 64 N·m 16.5 kgf·m. 47 lbf.ft)
Apply grease to the dust seal lips, then install it into
thP. drivP.n flange .
Insta ll the brake disc with the mark facing out.
Install and tighten the new bolts to the spec ified
torque.
TORQUE: 42 N•m (4.3 kgf•m, 31 !bf.ft)
INSTALLATION
Apµly yrease to the side co llar inside and grooves.
lnstDII the side collars.
Instal l the rear brake ca liper brnc:ket onto thP. guide of
the swingarm.