Honda CBR600F4i Series Service Manual page 406

Loosen the pad pi n.
Remove the cali per bracket bolt.
Pivot lhe <.:aliµer UJJ.
Remove the parl pin 11nrl hrnkP. p11rls.
M11ke sure the brake pad spring is in place.
Install the new b rake pads.
Lower the ca liper while push ing thP. p11rls ~g11inst th P.
pad spring so t he pod ends ore posit ioned onto th e
retainer on the caliper bracket.
lnstllll the pad pin.
Install and t ighten the caliper bracket bolt .
TORQUE: 23 N•m (2.3 kgf•m, 17 lbf.ft)
lighten the pad pin .
TORQUE: 18 N•m (1.8 kgf•m, 13 lbf.ft)
HYDRAULIC BRAKE
,
CALIPER BRACKET BOLT
--
CALI PFR BRACKET BOLT
__
.. __ _
15-9