Honda CBR600F4i Series Service Manual page 446

Start thP. P.ngine and let it idle.
IDLE SPEED: 1,300 : 100 rpm
The ignition tim ing is correct if the in dex mark on the
right crankcase cover aligns between the "F" mark
and the three punch marks on the ignition p ulse gen-
P.r11tor roto r as shown.
Check t hat t he O-ring is in good condit ion, replace if
necessary.
Apply grease to the timing hole cap threads and
install th e 0 -ring and timing hole cap.
Tig hten the ti ming hole cap to the spP.cifiP.<1 torque.
TORQUE: 18 N•m (1.8 kgf•m, 13 !bf.ft)
IGNITION SYSTEM
17-9