Honda CBR600F4i Series Service Manual page 64

FRAME/ BODY PANELS/ EXHAUST SYSTEM
MUFFLER/EXHAUST PIPE
REMOVAL
Remove the lower cowl and inner half cowl (page 2-4).
r;,./i/(')rni,., rype Disconnect the
Oz
sensor
4P
(Natural) connector.
only:
Remove the
02
sensor wini from the frame_
Loosen t he muffler ba11d bo lts .
Remove the m uffler mou nti ng bolt/ nut and washer,
then remove the m uffler.
Remove the gasket.
Re move the rad iator lower 111ounting bolt/nut, the n
move the radi at or forwa rd.
4P (NATUHALJ CONNECTOR
BOLTS
2-19