Honda CBR600F4i Series Service Manual page 137

FUEL SYSTEM (Programmed Fuel Injection)
PGM-FI MIL 11 BLINKS (VEHICLE SPEED SENSOR)
Turn the ignition switch to "OFF" .
Disconnect t he veh icle speed sensor 3P cu1111ec-
tor.
Check for loose or poor contact on the vehicle
Connect thf! vP-h iclP. sreed sensor 3P connector.
Start the engine.
Ritle the motorcycle and keep the engine revs
more than 5,000 rpm for 20 seconds or m ore.
Put the side stand down and check that the MIL
bl inks.
11 blinks
Turn the ignition switch to "Off".
Does not blink
Out of ra nge
Disconnect the vehicle speed sensor 3P co nnec- I-----....::'--_..
tor.
Turn the ignition switch to "ON " .
Measure t he voltag e at the wire harness side
Vo ltage ex ists
5-24
Louse ur poor contact on the vehicle speed sensor
connector.
Open o r short circu it in Black wire of the engine
sub-harness.
Open or short circuit in Black/Brown wire of t he
ml'!in w ire harness.