Available Channels In The Channel Setup Menu - Christie Roadie HD+35K User Manual

Section 3: Operation
NOTES: 1)
The current channel is highlighted upon entering the channel list, or, if this channel is not displayed
here, the first channel in the list is highlighted.
channel list unless a parameter for the channel has been changed.

3.7.4 Available Channels in the Channel Setup Menu

All available channels are listed in the
accessed and which serves as the gateway for editing, copying, and deleting channels.
From the presentation level, press M
Channel Setup
highlight the
active channel highlighted.
What Appears in the Channel Setup Menu?
This menu lists all channels currently defined and indicates where they connect on
the projector's side input panel. The far left column lists channel numbers currently
defined. The values in the far right columns indicate horizontal and vertical
frequencies or if someone has defined a name for this channel, it appears here
instead. Remaining columns contain details pertaining to each channel setup, such as
the switcher number (always 0 = projector), slot location (01-06; 7 + 8 with optional SDH), a variety of icons
indicating access to each channel, and an abbreviated description of each signal type. Refer to
Editing a Channel Setup
If you have more than a handful of channels, use the L
NOTE:
channels not visible in the initial display of channels.
3-38
Figure 3-20 Selecting a Channel
Channel Setup
ENU
to display the
option, and press E
Figure 3-21 All Channels Appear in Channel Setup Menu
for details.
2)
Channels created automatically do not appear in the
menu, which describes how each channel can be
Main
menu. To display the
NTER Channel Setup
. The
and R
EFT IGHT
Channel Setup
menu appears (see below) with the
Section 3.7.7
Arrow keys to see the remaining
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
menu,