Removing And Installing The Front Seat Belt Buckle - Skoda Rapid NH 2014 Workshop Manual

– Remove screw -2- (40 Nm).
– Remove seat belt buckle -1-.
Note
The screw -2- is microencapsulated and must be replaced
♦
each time it has been released.
Before installing the new screw, the thread of the correspond‐
♦
ing nut must be cleaned.
Installing
– The installation occurs in reverse order.
1.4 Removing and installing the front seat
belt buckle
Removing
– Remove front seat
⇒ "1.1 Removing and installing front seat", page 286
– Remove the plug -1- from the connector station below the seat.
– Unclip the wiring loom attachments -arrows- from the seat
rack.
– Remove screw -2- (40 Nm).
Note
The screw is microencapsulated and must be replaced each time it has been released.
♦
Before installing the new screw, the thread of the corresponding nut must be cleaned.
♦
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
.
215
1. Seat belts