Removing And Installing The Cover - Skoda Rapid NH 2014 Workshop Manual

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
1 - Rear bumper
2 - Monte Carlo rear spoiler
3 - Glue sealing material
3.2

Removing and installing the cover

Note
♦ The ambient temperature as well as the temperature of the
parts must be at least 18 °C, maximum 30 °C.
After glueing the tuning parts, the vehicle must remain in a
♦
warm room for at least 3 hours.
Before glueing, all of the adhesive surfaces must be de‐
♦
greased with good quality - the quality of the glued joint de‐
pends upon this!
Adhesive mate‐ Part number
rials
PUR - adhesive D 172 090 A2
Glass/paint pri‐ D 822 150 A1
mer for plastic
parts
172
Rep. gr.66 - Exterior equipment
Purpose, application range
Glue tuning parts to the body.
Prepare the plastic surfaces before
gluing to improve adhesion of the plas‐
tic
Denomination, manufacturer,
comment
Caution: Comply with the
manufacturer's handling in‐
structions. Filling: 310 ml
Filling: 10 ml