Skoda Rapid NH 2014 Workshop Manual page 276

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
Installing
– The installation occurs in reverse order.
Carry out the following tasks
– After installing the trim panels, ensure that the trim panels are
located in the double-braided strip of the door seal.
– Check whether the bottom B-pillar trim panel and the door sill
panel are clipped together and fitted.
Note
Before the installation, check all the fixing elements for dam‐
♦
age, if necessary replace.
On vehicles with seat belt height adjuster, ensure before in‐
♦
stalling that the seat belt height adjuster is located at the shell
and the slider of the seat belt height adjuster is in the top po‐
sition at the trim panel.
After the installation has been performed, carry out a func‐
♦
tional test of the seat belt height adjuster.
Make sure that the seat belt is correctly positioned and has
♦
unobstructed movement.
268
Rep. gr.70 - Trim, insulation