1 - Steering wheel
Removing
–
Remove driver's airbag
unit
⇒ Item 3 (page 233)
–
Position the steering
wheel to centre position
(wheels in straighta‐
head position).
–
Unscrew screw -2-.
–
Mark the opposite posi‐
tion of the steering
wheel and the shaft -4-
with a line, as long as
this position is not facto‐
ry-marked.
–
Remove the steering
wheel from the steering
column.
Installing
–
The installation occurs
in reverse order.
2 - 30 Nm + 90°.
–
Can be used up to five
times, then replace.
–
Mark with a dot after
each mounting.
3 - Airbag unit
–
Removing and installing
⇒ "3.13 Removing and installing driver airbag unit", page 233
4 - Steering wheel shaft
3.13
Removing and installing driver airbag
unit
WARNING
Observe the general safety instructions for working on airbag,
belt tensioner and battery separation units (pyrotechnical com‐
ponents)
⇒ "3.3 Observe the general safety instructions for working on
airbag, belt tensioner and battery separation units (pyrotech‐
nical components)", page 225
Observe the special instructions for driver and front passenger
airbag
⇒ "3.4 Special instructions for driver and front passenger air‐
bag", page 226
.
.
.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
.
233
3. Airbag