Skoda Rapid NH 2014 Workshop Manual page 269

– Pull the door trim panel towards the top and out of the window
channel.
– Push the Bowden cable -3- on the inside of the door trim panel
out of the inner door control -2- in -direction of arrow- and un‐
clip the end piece -1-.
– Disconnect the plug connections of the wiring looms from the
door trim panel depending on the vehicle equipment.
Installing
– The installation occurs in reverse order.
Note
Before the installation, check all the fixing elements for damage,
if necessary replace.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
2. Door and side trim panels
261